Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Chris King XD Driveshell
$285.00
Chris King ISO XD Driveshell assembly, complete with bearings.
WTB TCS Rim Tape
$14.95 - $79.95
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Shimano Alfine SG-S700 Left Hub Seal Ring
$4.99
Keeping that well-functioning Shimano Alfine internally geared hub in top working condition means keeping the internals clean. Replace the left hub seal ring when necessary for continued performance and to preserve the longevity that you expect from Alfine.
Cane Creek Helm D-Loc Thru-Axle
$55.00
Thru Axle for Helm suspension forks.
WeThePeople Arrow Front Hub Axle/Cone Set
$28.99
Get your WeThePeople Arrow Front Hub Axle/Cone Set and freshen up that front end that's a little wobbly after that last time you cased it on the spine.
WeThePeople Supreme Front Hub Female Bolts
$28.99
If you're going to push yourself, you need to be able to rely on your equipment. Make sure your front wheel is super secure with these WeThePeople Supreme Front Hub Bolts. For best results: replace when ground to nubs.
WeThePeople Helix Freecoaster Hub
$154.99 - $159.99
WeThePeople took the tried and tested features from the best freecoasters to date and then developed their very own patented 3 point clutch friction system, making the Helix Freecoaster the most durable and reliable free coaster of its kind. Paired up with a pair of WTP plastic hub guards, the Helix will roll front or back like butter and hold up to any peg abuse that comes its way. - 9T driver - 14mm axle
Ritchey WCS Axle Adaptor Kit for MTN Hubs 9mm TA Front
$19.95
Authentic Ritchey hub conversion kit for mountain bike hubs.\ - Convert 15mm (OD) alloy axle to use a 9mm thru-axle - End cap conversion for Vantage and Trail non 2-piece V2 hubs for QR - Axle not included
Shimano Alfine SG-S700 Right Hand Dust Cap D
$2.99
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
WeThePeople Arrow Front Hub Female Bolt Set
$29.99
Keeping the front wheel securely on the bike is kinda important. This WeThePeople Arrow Front Hub Female Bolt Set keeps your wheel right where it belongs. Sticking the nose manual is up to you.
Ritchey Comp Hub Axle Adapter Conversion Kit
$19.95
Authentic Ritchey hub conversion kit for mountain bike hubs. - Convert 15mm (OD) alloy axle to QR9 ID - Quick release skewer not included
Ritchey WCS Axle Adaptor Kit for MTN Hubs 20mm Thru Axle Front
$19.95
Authentic Ritchey hub conversion kit for mountain bike hubs. - End cap conversion for Vantage and Trail non 2-piece V2 front hubs - Convert to 20mm thru-axle
Ritchey WCS Hub Axle and End Caps for Apex and Zeta II Disc Rear Wheel with Shimano HG Freehub
$49.95
Replacement axle and end cap for 2-piece rear disc road hubs - Retains original 12mm thru-axle set-up
SRAM Rise 60 Conversion Caps
$23.99 - $26.99
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.
Ritchey Snap-On Rim Strip
$10.99
• Easily snaps over your rims • Stretchy, tightly woven material provides a close fit and protects from abrasion • Sold as a pair • Available for 26-inch, 27.5-inch, 29-inch, and 700c wheels • Not for tubeless set up
Specialized Roval Titanium Quick Releases
$50.00 - $60.00
• Titanium axles with alloy hardware • Steel cam mechanism for longevity, and self-lubricating brass bushings
Chris King 135 x 12mm Rear Axle
$135.99
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with 150mm, 157mm or Singlespeed Hubs) - Allows you to run a 135x12mm Thru Axle on 135mm or 142mm Chris King ISO Hubs - All axles require an adjusting clamp for installation
WeThePeople Dill Pickle Peg Sleeve
$15.99
Replacement sleeve for the Dill Pickle Peg - Length: 4.5" - Diameter: 1.5" - Material: Nylon/fiberglass compound
WeThePeople Helix Driver Guard
$23.99 - $39.99
When you own a freecoaster as good as the Helix, you're going to want to keep it protected. WTP's Helix driver guards work on the drive side of the Helix freecoaster and replace the cones for a perfect fit without having to spread your dropouts. - Fits Helix V1 and Helix V2 freecoaster hubs - Available in 7075-T6 alloy or Nylon Fiberglass - Comes with heat-treated chromoly adaptor to replace hub cone nuts for perfect fit
WeThePeople Supreme Rear Hub Axle/Cone Set
$46.99
WeThePeople Supreme Rear Hub 14mm Axle/Cone Set
SRAM Rise 40 Conversion Cap Tool
$16.99
SRAM's Rise 40 Conversion Cap Tool will allow you to easily change the conversion caps (sold separately) on your Rise 40 wheels.
Stan's NoTubes Rim Tape
$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
Spank Oozy/Spike Freehub Bodies
$85.00 - $114.99
Replacement cassette bodies for Oozy hubs and Spike hubs. - Shimano or SRAM - Alloy or Steel
Race Face Vault End Cap Set
$20.00
Race Face Vault Endcap Set for Vault 414 and 412 hubs.
SRAM Conversion Caps for Roam 60/50 and Rail 50 Wheels (Rear)
$65.99 - $79.99
SRAM's Conversion Caps are just what you need to convert your Roam 60, 50, or Rail 50 wheels to fit your bike's rear axle.
Race Face Arc/Aeffect Rim Decal Kits
$29.99
Hop up your rig with these custom rim decal. Available for the entire Arc rim range (24mm - 45mm) as well as Aeffect SL, R and Plus. Each set comes with enough decals to do a complete wheelset (2 wheels). Now your bike can be as pro as your riding kit!
Wheels Manufacturing Inc. Outer Axle Nut
$2.99 - $9.99
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
Zipp 11-speed Freehub Kit for 177 Hub
$111.99
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
WTB TCS AL 46mm Presta Valve
$29.99 - $30.99
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 46mm
Chris King R45 Cassette Lockring
$50.99 - $58.99
Designed with today’s taller, double-digit cog stacks in mind, Chris King's R45 cassette lock rings feature longer threads to provide secure engagement with the hub driveshell. A Chris King cassette lock ring is the perfect complement to any Chris King hub, or for anyone looking to add a dash of King performance to other manufacturer’s compatible rear hubs. They are available for both 11 and 12 tooth small cogs, as well as Shimano or Campagnolo hubs.
Page 1 of 6 Next page