Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish
DrTray is the ultimate tray rack for your hitch. It can easily handle road, mountain, and fat-tire bikes with up to 5” tires. Bike clearance is top notch, with 18” between the trays. To make it even better, the bike tray spacing can be adjusted tool-free while the bikes are loaded, virtually eliminating any issues with bike-to-bike interference. The ergonomic remote tilt lever is intuitive to use and allows quick access to the rear of the vehicle as well as a convenient carrying handle. Its locking SpeedKnob delivers simple and secure vehicle attachment, and exceptional bike theft protection is built in with a burly SKS cable lock system. Plus, DrTray is adaptable – add an EZ+1 to carry a third bike! - Weighs in at only 34 pounds– the lightest rack in its class. (2” receiver Model only) - Securely carries 26” to 29” wheels and tires up to 5” wide - Unrivaled spacing between bikes - up to 18” between each bike - Tool-free adjustment while bikes are loaded minimizes the potential for bike-to-bike interference - Easy-to-use remote tilt lever and lightweight, aluminum design makes raising and lowering the rack a breeze - Tool-free locking SpeedKnob for a secure and easy install to your vehicle - Extra burly SKS cable lock system for each bike secures both wheels and frame - Add the EZ+1 and carry a third bike (2” receiver model only, sold separately) TECHNICAL SPECS - Weight: 34.00 lbs - Dimensions: L 16.00” x W 54.00” x H 11.50”
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall
Super simple and built to last, the new Yakima HangOut 2 offers grab-and-go bike carrying convenience for almost any vehicle. The adjustable strap system and QuickTrigger hub make installation easy, and the padded feet and coated metal buckles protect your vehicle’s paint. Integrated StableCradles secure your bikes for a confident carry and make loading and unloading a piece of cake. When you aren’t off adventuring, the HangOut folds flat for compact storage. - QuickTrigger hub system makes install easy and fast - Integrated StableCradles hold bikes firmly in place - Padded feet and coated metal buckles protect your vehicle - Arms fold for compact storage - Number of Bikes: 2 TECHNICAL SPECS - Weight: 16.00 lbs - Dimensions: L 27.50” x W 21.50” x H 11.25”
Low-cost dual carrier with NEW Italian-made cages. Featuring 60% more grip force with an 8lb bottle grip. Includes 2 saddle mounts & 2 Xenon cages. Does not include bag. - Dual bottle system tucks neatly behind your saddle for easy access to hydration - NEW upgraded Italian-made, Xenon cages increase cage grip force by 60% over original model - Mounts low to not hinder your ability to get on and off the bike - First-time rear hydration system buyer? Mounts with a single screw for no-fuss install so you can self-install and quickly get on the road Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping Xenon cages tout an 8lbs grip force (approx) – within the ideal range of rear system grip force for worry-free bottle retention Easy storage upgrades readily available - Add an XLAB Mini Bag – a compact storage bag that sleekly mounts between the cages! - Mini Bag easily fits all the essentials for a clincher repair kit – 1 tube, XLAB Air Strike CO2 cartridges, patch kit, XLAB inflator and tire levers - Includes: 2 Mini Wing Cage mounting brackets and 2 XENON Cages - Color: Silver mounting brackets with black cages - Material: 6061-T6 Aluminum mounting brackets. Nylon composite cages. - Cage Grip Force: 8lbs (3.6 kg) approx - Weight: 186g - Warranty: 3 Year Limited Warranty
Everyone deserves a fresh, new water bottle now and then. This classy bottle from Whisky works great and is sure to make any bike a little fancier. - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Squeezable materials allow for unmatched flexibility and comfort
Tub of 25 Grade 25, 3/16" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25: - Dura Ace or Campy Record quality - 25 per tub
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese front hubs - Type: Hollow Axle - Threads: 9mm x 1 - Diameter: 9mm - Length: 110mm - 1 axle per bag
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Wheels Mfg original BB86/92 bottom bracket is a significant upgrade to any OEM BB86 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 114g
BBRight™ Outboard bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 148g
Wheels Manufacturing Wave Washers help eliminate side play in cranks or pre-loaded angular contact bearings. Please refer to your crankset manufacturer's installation instructions for proper placement. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Uncompressed Thickness: 2.1mm - Compressed Thickness: 0.5mm - Spring Steel - 10 per bag
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 socket head screw included - Replaces Specialized Amazinger 2.0 (S16260002) and Amazinger 2.1 (S172600003) Hanger
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Specialized Part #S172600001 - Includes both sides of the derailleur hanger - Attaches to frame with (1) M3x6 socket head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 161g
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
- Steel wheels - For riders up to 100lbs - Fits 12" - 20" wheel bikes
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
WD-40's Frame Protectant is specially formulated to prevent the build-up of dirt, dust and grime on bicycles. Once treated, surfaces stay cleaner longer so your bikes always look great. Plus it helps restores scratched areas and the luster of clear coats on carbon and all other bike finishes, too.
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.
Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.
Premium hanging hitch bike rack providing superior bike protection and multiple size options to fit the needs of two people or an entire family. Features - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Bikes are safe and secure during transport thanks to 7" of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Easily fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easy to carry and handle, thanks to integrated grab handle - Quick to install and easy to lock the rack to the vehicle due to the tool-free, SnugTite stinger (lock included) - Easily transfers between 1.25" and 2" hitch receivers Technical specifications - Max number of bikes: 4 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.1 x 11 x 37 in - Folded dimensions: 15.4 x 11 x 37 in - Weight: 35 lb - Distance between bikes: 7 in - Carbon frame compatible - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included
Lightweight aluminum hitch bike rack provides outstanding bike protection and easy-on, easy-off convenience. Features - Super lightweight aluminum construction is half the weight of steel hitch bike racks, providing easy installation, removal, and handling - Unsurpassed hanging hitch carrier bike protection with industry-leading 7" spacing between bikes - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Convenient access to rear of vehicle - HitchSwitch feature allows rack to be easily tilted down - Complete bike security with integrated cable lock (lock included) - Quick, secure and confidence-inspiring bike attachment with ratchet strap cradle strap - Easily fold down bike arms when not in use with conveniently located HitchSwitch lever - Compact cradle design accommodates wide variety of bike sizes/frame styles - Fast, tool-free installation with SnugTite stinger design delivering maximum speed, stability and security (lock included) - Transferable between hitch receivers, fits 1.25" and 2" hitches Technical specifications - Max number of bikes: 2 - Load capacity: 75 lb - Max bike weight: 37.5 lb - Dimensions: 32 x 11 x 37.3 in - Folded dimensions: 20.7 x 11 x 37.3 in - Weight: 19 lb - Distance between bikes: 7 in - Carbon frame compatible - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included
Fully adjustable, upright bike carrier designed for the inside of the truck bed. Features - Quickly secure the bike without frame contact using the ratcheting arm - Ideal for carbon frames, mountain, downhill, ebikes and fat bikes - Accomodates wheel sizes from 20 - 29" and up to 5" tire - Lock bike to rack using Thule's One-Key system (lock included) - Holds 1 bike up to 50lbs - Fits all pickup tailgates - No bolting or drilling required Technical specifications - Max number of bikes: 1 - Dimensions: 40.6 x 18 x 6.7 in - Weight: 11 lb - One Key System compatible
Grab your bikes, put them on the back of your vehicle and go with Thule's Passage rear rack. It's that easy because Thule's innovative Fit Dial easily attaches the Passage to most vehicles and the 6 straps securely hold it in place (straps not shown), while Thule's rubber anti-sway cradles keep your bikes from swaying into each other. You'll also love that the rack arms fold making it super easy to store this rack when it's not in use.
Specifically designed to handle the tremendous forces on the back of an RV/travel trailer, this carrier is durable, protective and secure. Features - Superior bike stability and fit with integrated anti-sway that prevent bike to bike contact and ‘disappears’ when not needed - Bikes are safe and secure during transport thanks to 7” of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates wide variety of bike sizes/frame styles - Lock bikes to the rack using the integrated cable lock (lock included) - Easily fold down bike arms when rack is not in use - Carrier locks to the RV with the Thule STL2 bolt (lock included) Technical specifications - Max number of bikes: 4 - Load capacity: 150 lb - Max bike weight: 37.5 lb - Dimensions: 42.1 x 11 x 35.6 in - Folded dimensions: 14.8 x 11 x 35.6 in - Weight: 36 lb - Distance between bikes: 7 in - Carbon frame compatible - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included
Page 1 of 15 Next page